Downloads

Disclaimer

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

FunnelWeb

FunnelWeb is a stable version of the ROOter firmware. It has all the features of Huntsman and new ones of its own.

The smaller routers with only 4 meg of Flash RAM do not gain any new features with this version because of lack of memory but do have support for several new modems and some bug fixes. If you are not experiencing any problems with your Huntsman ROOter then there is no need to update to FunnelWeb.

Features of FunnelWeb for 8 meg and larger Routers

  • Automatic mounting and sharing (using Samba) of USB storage devices.
  • OpenVPN with a web interface for configuration.
  • Media Server fully compliant with DLNA/UPnP-AV clients.
  • WAN Manager to allow setting up a DSL/modem failover system and load balancing.

Features of FunnelWeb for all Routers

  • Quality of Service (QOS)
  • Client and Repeater Mode
  • User Added Support for New Modems
  • PAP and CHAP Authentication
  • Keep Connection Alive with user settable options and modem power toggling if supported by the router.
  • Hardware reset to remove password
  • Hardware reset to restore firmware to flash condition
  • Network Status web page to display signal and cell information
  • Ability to execute AT Commands from the web interface
  • DDNS Client package
  • Sim PIN code checking
  • Support for Hilink E3276 modems flashed to regular firmware
  • Check for firmware updates from the web interface
  • Modem Debug information is displayed on the Information page
  • Support for Host-less modems
  • Bandwidth Monitor implemented
  • Cellular Mode display and selection
  • Reprogramming of the router buttons
  • Force all modems to use PPP protocol
  • SMS Messaging is supported
  • Better support for hostless modems.
  • Disable USB power if supported by router.
  • Scheduled shutdown and startup of both the modem and Wifi.
  • Quicker modem connection times.
  • Quicker boot up times.
  • Different methods of Connection Monitoring are available.

See this page for more information on using the new features.

Router Model
Version

FunnelWeb 2014-04-14

   
OpenWRT R40396
TP-Link MR10U
V1
TP-Link MR11U
V1
TP-Link MR11U
V2
TP-Link MR13U
V1
TP-Link MR3020
V1
TP-Link MR3040
V1
TP-Link MR3040
V2
TP-Link MR3220
V1
TP-Link MR3220
V2
TP-Link MR3420
V1
TP-Link MR3420
V2
TP-Link WR703N
V1
Slboat WR703N 8meg flash
V1
TP-Link WR720N
V3
TP-Link WR710N
V1
TP-Link WR842N/ND
V1
TP-Link WR842N/ND
V2
TP-Link WR1043ND
V1
TP-Link WR1043ND
V2
TP-Link WR2543N/ND
V1
TP-Link WDR3500
V1
TP-Link WDR3600
V1
TP-Link WDR4300
V1
TP-Link WDR4310
V1
TP-Link WDR4900
V1
Mercury MW4530R
V1
Hame MPR-A2
V1
---
WD MyNet N600
V1
WD MyNet N750
V1
Dlink DIR505
A1/A2
Dlink DIR825
B1/B2
---
Dlink DIR825
C1
Dlink DIR835
A1
Netgear WNR3500L
V1
---
Netgear WNDR3700
V1
Netgear WNDR3700
V2
Netgear WNDR3800
V1
Netgear WNDRMAC
V1
Netgear WNDRMAC
V2
     
VMWARE x86 4meg VMDK
VMWARE x86 8meg VMDK
     

 

Note : Netgear routers require a different method of flashing than the other routers and instructions are included in the package along with the required firmwares.